The electric charge (Q) is calculated using the formula Q = I * t, where I is the current in Amperes and t is the time in seconds. Converting 6 minutes to 360 seconds, we get Q = 0.6 A * 360 s = 216 Coulombs.
14842
What is the physical term used to describe the rate at which electric charges flow through a conductor?
Electric current is defined as the net rate of flow of electric charge through a cross-sectional area. Mathematically, it is expressed as I = dQ/dt, where Q is the charge and t is time. It is measured in Amperes, which corresponds to Coulombs per second.
14843
Which sensitive instrument is designed to detect small electric currents and must be connected in series within a circuit?
A galvanometer is an electromechanical instrument used for detecting and indicating small electric currents. By connecting it in series, the entire current of the circuit passes through the coil, causing a deflection of the needle. While ammeters are also connected in series, the galvanometer is specifically noted for its high sensitivity in detecting the presence and direction of current.
14844
Why is a bird able to perch on a high-voltage power line without sustaining an electric shock?
Electric current flows only when there is a potential difference between two points. Because the bird is touching only one wire, its entire body remains at the same electrical potential as the wire. Since there is no potential difference across the bird's body, no current flows through it. If the bird were to touch a second wire or the ground, a circuit would be completed, resulting in a dangerous current flow.
14845
Why is a bird able to perch on a high-voltage power line without suffering an electric shock?
For an electric current to flow, there must be a potential difference across the body. Since the bird is touching only one wire, there is no path for the current to travel through the bird to the ground or another wire of different potential. Without a closed circuit, no significant current flows through the bird's body.
14846
Electrical energy is primarily associated with the movement and interaction of which subatomic particles?
Electrical energy is the energy derived from the flow of electric charge, which is carried by electrons in conductive materials. While protons and neutrons reside in the nucleus, electrons are loosely bound and can move between atoms to create an electric current. The source explanation incorrectly identifies the SI unit of resistance as electrons; resistance is measured in Ohms, not particles.
14847
Calculate the total electric charge that passes through an electric bulb filament if a current of 0.75 A flows for 10 minutes.
The formula for electric charge is Q = I * t, where I is current in amperes and t is time in seconds. Given I = 0.75 A and t = 10 minutes = 600 seconds, the calculation is Q = 0.75 * 600 = 450 Coulombs. This represents the total quantity of charge transferred through the filament during the specified time interval.
14848
Which of the following statements accurately describes the characteristics or usage of an ammeter in an electrical circuit?
An ammeter is used to measure electric current. To function correctly, it must be connected in series with the component being measured. Ideally, an ammeter should have very low resistance to minimize the voltage drop across it, thereby drawing minimal power from the circuit. Since all these conditions are standard requirements for an ideal ammeter, 'All of the above' is the correct choice.
14849
Determine the total electric charge that passes through a resistor of 10 Ω in one minute, given a steady current of 0.5 A.
Electric charge (Q) is the product of current (I) and time (t). Given I = 0.5 A and t = 60 seconds (one minute), the charge Q = 0.5 A * 60 s = 30 Coulombs. The resistance value is extraneous information in this calculation.
14850
What is the necessary condition for electrons to flow through a metallic conductor?
Electric current is the flow of charge, which requires a driving force known as potential difference or 'electric pressure'. Electrons move from a region of lower potential to higher potential (or vice versa depending on convention) only when an external source, such as a battery, maintains this potential difference across the conductor. Without this difference, electrons move randomly and there is no net current.
